Model 101
An outstanding example of KEF technology, this small, unobtrusive loudspeaker achieves a standard of performance superior to most larger loudspeakers.
- Flat frequency response down to 90Hz (-10db at 47Hz)
- Two-way system designed for minimum inter-unit time delay
- Pairing of systems guarantees matching of sensitivity and frequency response to within 0.5dB
- Fully protected against fault conditions when used with amplifiers up to 100 watts
- Electronic overload protection, S-STOP, protects against overload and fault conditions
Model 101 Specifications
| Frequency Range | 90Hz - 30kHz +/- 2dB at 2m on ref axis (-10dB at 47Hz and 40kHz) |
| Directional Characteristics | Within 2dB of response on reference axis up to 20,000Hz for +/-5° vertically, up to 20,000Hz for +/-20° horizontally |
| Maximum Output | 100dB spl on programme peaks under typical listening conditions |
| Characteristic sensitivity level | 81dB spl at 1m reference axis for pink noise input of 1W (anechoic conditions) |
| Distortion | Second harmonic: less than 1% from 120Hz to 20kHz. Third harmonic: less than 1% from 70Hz to 20kHz. Measured at 1m on reference axis at mean spl of 90dB, anechoic conditions |
| Enclosure | 6.7 litres |
| Power handling capacity | See electronic overload protection |
| Programme rating | 100W |
| Sensitivity Maximum continuous sinusoidal input | 28V rms, 100-2,500Hz, falling to 8V rms from 4,000-20,000Hz |
| Electronic overload protection (S-STOP) | The system is protected against any continuous or intermittent fault conditions which produce input signals not greater than 50V peak from DC to 50kHz |
| Nominal impedance | 8 ohms |
| Weight | 5.67kg (12.5lb) |
| Dimensions | 348 x 180 x 197mm 133/4 x 7 x 73/4 |