The CR250SW
Home owners can now get deep bass from a flush mount speaker system by using the CR250SW, the first genuine in-wall stereo subwoofer. Used with the CR200F, to make a three way system, the CR250SW can also be used with other speakers via the high frequency output terminals of its onboard cross-over network. The 250mm bass units provide response down to 32 Hz (-2dB). The subwoofer needs only 94mm depth behind the surface and can go anywhere along the wall without disturbing the stereo image. Square mounting bezels and grilles are supplied.
CR250SW Specifications
| System | Subwoofer |
| Drive Units | LF: 250mm (10 in.) driver with high temperature voice coil |
| Frequency Range | +/-2 dB, 32 Hz - 150 Hz (-10 dB at 25 Hz) |
| Maximum Output | 112dB |
| Sensitivity | 90dB |
| Amplifier Requirements | 10 - 150 watts |
| Nominal Impedance | 4 ohms |
| Bezel Finish | White |
| Grille | White perforated metal |
| Cut-out Dimensions | 298 x 298mm (113/4 x 113/4 in.) |
| Mounting Depth | 91mm (35/8 in.) |
| Overall Dimensions (H x W x D) |
326 x 320 x 100 mm (127/8 x 125/8 x 315/16 in.) |