Ci160.2FS Description

The Ci Series Ci 160.2FS is budget flush-mount loudspeaker utilising a 160mm (6.5·) full range drive unit.The driver is mounted is mounted into a moulded ABS baffle and along with KEF's simple and ingenious screw down clamping system - with moisture-resistant fixings - allows placement even in the harshest environments such as bathrooms or even under eaves.

The bezel and stainless steel grille can be painted to specification or covered by fabric to suit the style of the room.

The full range Ci 160.2FS combines 80W power handling and 89dB sensitivity, with a frequency response (± 3dB) of 60Hz - 16kHz and a maximum output of 108dB.

Features and Benefits

160mm (6.5·) full range driver:
Smooth high frequency range, with good bass extension from a flush-mount loudspeaker.
Stainless steel bezel and grille:
Can be painted to specification or covered by fabric to suit the style of the room.

Applications

The Ci Series Ci 160.2FS is best suited for high quality music and speech reinforcement applications requiring hi-fi performance such as:

Multi Room systems
Home Theatre systems
Lounges, Bars, Boutiques
Boardrooms & Offices
Airports, Convention Centres, Hotels
Live Theatre/Concert Hall fill-in
Houses of Worship
Sports Arenas.

Architectural Specifications

The Ci Series Ci 160.2FS shall consist of:
1 x 160mm (6.5”) paper cone, full range drive unit.

Performance of the Ci 160.2FS shall meet or exceed the following criteria:
frequency response 1 metre on-axis with swept sinewave shall be 60Hz to 16kHz ± 3dB, sensitivity shall be at least 89dB for2.83V@1m.The driver impedance and maximum power handling shall be 80W at 8 ohms.

The enclosure shall not exceed the following dimensions: (H x W x D) 220 x 220 x 89mm 8.7 x 8.7 x 3.5 in.

Installations

Ci 160.2FS

Dimensions shown are cut-out sizes (in mm).

Graph: Polar Plots>>

Graph: Input Impedance>>

Graph: Power response>>

Parameters

These Parameters are for the LF unit(s) in free air with no crossover network attached.
SD	(Piston area)	132.73 cm2
Re	(DC resistance)	4.91 Ohms
Bl	(Transduction coefficient) (Flux density x length of immersed wire)	6.44 Tm
Fs	(Free air resonance frequency)	70.13 Hz
Mms	(Moving mass (including air load)	10.16 g
Mmd	(Moving mass (excluding air load)	9.29 g
Cms	(Compliance)	0.51 mm/N
Vas	(equivalent air volume of compliance)	12.47
Qms	mechanical Q	6.26
Qes	electrical Q	1.19
Qts	total Q	1.00

Ci160.2FS Specifications

Design	full range single driver
Frequency response at 15° horizontally off axis ±3 dB	60 Hz -16 kHz
Crossover frequency	N/A
Amplifier requirements	10 - 80 W
Sensitivity (2.83V/1m)	89 dB
Maximum output	108 dB
Impedance	8 Ohms
Magnetic shielding	No
Weight	1.3 kg (2.8 lbs)
Dimensions (H x W x D)	220 x 220 x 89 mm 8.7 x 8.7 x 3.5 in.