- Ci Series
- Ci Home
- + Ci50
- + Soundlight
- + Ci80QR
- + Ci100QR
- + Ci130DS
- + Ci130.2QS/QR
- + Ci130.2FS/FR
- + Ci160.2QS/QR
- + Ci160.2FS/FR
- + Ci200.3QS/QR
- + Ci200.2QT
- + Ci3-80QT
- + Ci400
- + Ci500AW
- + Ci9000ACE
- + CiFDT
- Rear Enclosures
- Cut-out Templates
Ci160.2QR Description
The Ci Series Ci 160.2QR is high-fidelity flush-mount loudspeaker utilising a fourth generation Uni-Q® driver array.
The driver array is mounted into a moulded ABS baffle and along with KEF's simple and ingenious screw down clamping system - with moisture-resistant fixings - allows placement even in the harshest environments such as bathrooms or even under eaves.
The bezel and stainless steel grille can be painted to specification or covered by fabric to suit the style of the room. The 2-way Ci 160.2QR combines 80W power handling and 89dB sensitivity, with a frequency response (±3dB) of 60Hz - 20kHz and a maximum output of 108dB.
Features and Benefits
- Fourth generation Uni-Q® driver array:
Superb off-axis dispersion characteristics from the coincident source driver arrangement with greater flexibility of positioning that comes from such a wide sound stage.
- 160mm (6.5”) bass/mid driver:
Good bass extension from a flush-mount loudspeaker.
- 25mm (1”) soft dome ferrofluid cooled tweeter:
Excellent power handling and smooth response.
- Stainless steel bezel and grille:
Can be painted to specification or covered by fabric to suit the style of the room.
Applications
The Ci Series Ci 160.2QR is best suited for high quality music and
speech reinforcement applications requiring hi-fi performance such as:
- Multi Room systems
- Home Theatre systems
- Lounges, Bars, Boutiques
- Boardrooms & Offices
- Airports, Convention Centres, Hotels
- Live Theatre/Concert Hall fill-in
- Houses of Worship
- Sports Arenas.
Architectural Specifications
The Ci Series Ci 160.2QR shall consist of:
1 x Uni-Q driver array - 160mm (6.5”) polypropylene cone bass/mid unit with a coincident mounted 25mm (1”) soft dome, ferrofluid cooled high-frequency unit.
Performance of the Ci 160.2QR shall meet or exceed the following criteria:
frequency response 1 metre on-axis with swept sinewave shall be 60Hz to 20kHz ±3dB, sensitivity shall be at least 89dB for 2.83V@1m.
The driver impedance and maximum power handling shall be 80W at 6 ohms.
The enclosure shall not exceed the following dimensions: (H x W x D) 220
x 220 x 89mm 8.7 x 8.7 x 3.5 in.
Installations
Dimensions shown are cut-out sizes (in mm).
Parameters
| These Parameters are for the LF unit(s) in free air with no crossover network attached. | ||
| SD | (Piston area) | 132.73 cm2 |
| Re | (DC resistance) | 6.20 Ohms |
| Bl | (Transduction coefficient) (Flux density x length of immersed wire) |
4.57 Tm |
| Fs | (Free air resonance frequency) | 77.35 Hz |
| Mms | (Moving mass (including air load) | 10.85 g |
| Mmd | (Moving mass (excluding air load) | 9.98 g |
| Cms | (Compliance) | 0.39 mm/N |
| Vas | (equivalent air volume of compliance) | 9.60 |
| Qms | mechanical Q | 5.70 |
| Qes | electrical Q | 1.57 |
| Qts | total Q | 1.23 |
Ci160.2QR Specifications
| Design | 2 - way Uni-Q, 2 - driver |
| Frequency response at 15° horizontally off axis ±3 dB |
60 Hz - 20 kHz |
| Crossover frequency | 2.8 kHz |
| Amplifier requirements | 10 - 100 W |
| Sensitivity (2.83V/1m) | 89 dB |
| Maximum output | 108 dB |
| Impedance | 8 Ohms |
| Magnetic shielding | No |
| Weight | 1.5kg (3.3 lbs) |
| Dimensions (H x W x D) |
220 x 220 x 93mm 8.7 x 8.7 x 3.7 in. |