XQ20

The XQ20 boasts the same large Uni-Q driver as the flagship XQ40 in a stand mount format, so its mid and treble performance envelope is similarly impressive.

With KEF’s sophisticated elliptical dome tweeter mounted in the acoustic centre of the bass/midrange cone, the latest Uni-Q^® array with ‘tangerine’ waveguide disperses an uncannily accurate sound image throughout the room with startling clarity, so you have far greater freedom of positioning. Bass extension is as generous as it is well defined, thanks to an ultra-low-distortion bass/midrange driver in a massively braced reflex-ported enclosure.

Full bandwidth two-way stand mount/bookshelf speaker

KEF's latest 165mm (6.5in) Uni-Q midrange/HF 'point source' array with new 'tangerine' waveguide

Natural-sounding high performance elliptical dome 19mm (0.75in) tweeter

Low distortion 165mm (6.5in) driver

Magnetically shielded, with a choice of three superb high gloss finishes and optional stand

Model	XQ20
Design	Two-way bass reflex
Drive Units	165mm (6.5in.) Uni-Q with 19mm (0.75in.) aluminium dome HF
Crossover Frequencies	2.4kHz
Sensitivity (2.83V/1m)	88dB
Frequency Response (+/-3dB)	52Hz - 55kHz
Maximum Output	109dB
Amplifier Requirements	15 - 120W
Magnetic Shielding	Yes
Impedance	8 Ohms (min 3.2)
Weight	9.2kg (20.2lbs)
Dimensions (H x W x D)	385 x 231 x 302 mm (15.15 x 9.09 x 11.88 in.)
Finishes	Birdseye Maple, Khaya Mahogany or Piano Black

Birdseye Maple

A distinctive pattern of small dark swirls brings out the rich, satin-like amber sheen of this close-grained hardwood, which has for centuries been selected for making musical instruments.

Khaya Mahogany

Varying from light to dark reddish brown with a deep natural lustre and an interlocked grain, this hardwood comes from renewable sources in Africa and Madagascar and is often used for the back and side panels of bespoke guitars.

Piano Black

Pure black finished to a glass-like sheen, like a Steinway concert grand. A true classic.

Aluminium dome tweeter with ‘tangerine’ waveguide

The unique 'tangerine' waveguide delivers a smoother, clearer high frequency response with an even wider disperson as well as providing an excellent protection from straying fingers.

Uni-Q^®

KEF’s patented Uni-Q driver configuration is what makes the XQ range sound noticeably better than conventional speakers in normal rooms.

The new Uni-Q array in the XQ has been further refined, with a sophisticated new 19mm (0.75in.) elliptical dome tweeter, improved acoustic geometry and ‘tangerine’ waveguide for even more realistic vocals and even smoother, louder and clearer high frequency response.

LF Drivers

At the lower frequencies, the new LF drivers are impressive. Redesigned magnetics and low mass coils of edge-wound copper coated aluminum wire allow the cone greater length of travel for gloriously extended bass. Faraday loops are also incorporated to improve dynamics and reduce harmonic distortion further still.

Reference Inspired Crossovers

The new XQ range includes audiophile grade crossovers inspired from the Reference Series. The crossovers are computer-modelled to optimise integration between the drive units. The boards are decoupled to isolate them from cabinet vibration and internal acoustic pressures. The result is smooth transitions throughout the frequency range.

Cabinets

The cabinets are determined by acoustic considerations as much as aesthetic ones. As well as being inherently more rigid than flat sides, the distinctive curved panels of the XQ Series are engineered to dissipate any internal standing waves that might otherwise colour the sound over the critical midrange frequencies. The internal bracing is computer optimised to tailor the exact volume of each enclosure to the drive unit it houses. Grilles are held in place by concealed magnets which subtly improves the lines of the baffle as well as being a tactile pleasure to use.

With a choice of three superb new high-gloss options in: hand matched Birdseye Maple or Khaya Mahogany veneers as well as classic Piano Black.